AC W02

The four-section AC W02 injector offers excellent performance and a standardized range of applications with other products of AC S.A., both the new and older ones.

AC W02 has been designed for LPG and CNG injection systems in all engines, including turbocharged ones.

AC W02 ensures the following:

  •  very good and stable parameters of injection: opening time ~2.0 ms, closing time ~1.0 ms,
  •  fast and easy installation;
  •  modern and fine-tuned construction to ensure excellent performance;
  •  long service life thanks to the high quality of selected materials and innovative design.

AC W02 works perfectly in spite  of the driving style and engine load.

Advantages of W02 injectors:

  • plastic body, reduced weight and improved resistance to the negative effects of gas,
  • easier installation due to reduced dimensions and weight,
  • compatibility with the previous version of W01, as well as competitive products,
  • designed for LPG and CNG injection systems in all engines with various power ratings, including turbocharged ones.
  • innovative design solutions and improved materials ensuring excellent operating performance and body strength,
  • test versions of the injector as 3-, 2- and 1-secton units installed directly at the intake manifold, with the optional installation of PS-04 sensor on one of the injectors,
  • switchable plug and feed connection (feeding on any side) and installation of PS-04 sensor (on any side) that can be turned by 360° even after it is installed on the injector,
  • service life reaching 100 km in urban driving or 200 km in highway driving.

Compared to the previous version of AC W01 injector, AC W02 has been redesigned to ensure the best injection times in any conditions by the use of specially selected materials, as well as a light and simple construction which allows easier installation. AC W02 has been designed so that it can be easily used to replace W01 in the existing systems. Additionally, the system of connecting the components brings greater configuration The structure also offers the installation of the integrated gas temperature and pressure sensor PS-04 with low inertia of the response to gas temperature changes on any side and with 360˚ turning functionality even when installed on the injector.



W02 responds quickly to even minimum and transient load changes due to the excellent opening and closing characteristics. The minimum number of components and a plastic body make it light and simple.





Configuration options:

1. ACW02 injector rail with a direct connection of the PS04 sensor allowing sensor turning to adjust its position and ensure precise measurements of pressure and temperature.

 2. ACW02 injector rail with the PS04 sensor installed on the feeding line, using a T-connector.

Standards and approvals:
STAG AC W02 injector has been approved under E8 approval No. E8 67R-01 7064, 110R-00 7065 and meets the requirements of UNECE Regulations.


AC W02
Maximum flow at 1,2 bar [l/min.] 125
Working temperature [°C] -20 do +120
Maximum working pressure [bar][kPa] 400
Injector opening / closing time at 1,2 bar [ms] 2,0 / 1,0
Coil resistance 1,9Ω
Size of the nozzle

Ø 1,5; Ø 1,8; Ø 2,0; Ø 2,2; Ø 2,4; Ø 2,6
(z możliwością samodzielnego
rozwiercenia max. do Ø 2,8)

Mass [kg] 0,41


Mobile applications


Controllers LPG/CNG direct petrol injection

Controllers LPG/CNG - DIESEL



Injection rails LPG / CNG

Reducers LPG

Reducers CNG

Fuel injector emulator - Controllers LPG/CNG direct petrol injection

Fuel injector emulator

Fuel level emulator

Fuel pressure emulator


Switches petrol / gas

Fuel Level Indicators WPG

Timing Advance Processors

The pressure sensor

Recorders LPG/CNG




LPG multivalve